ONEBALL Black 8mm Ptex (For Base Repair)

These P-Tex Repair Sticks come in both clear and black colors and in two primary sizes of 8mm and 11mm. To repair your base, you need to first make sure your base is clean of any wax. Use ONE MFG Base Cleaner to prep the repair area. Using a steel scraper or razor blade, try to get the area around the gouge flat and clear of any frays of P-Tex. Make sure it's a nice smooth surface to bond to. Using a lighter, heat up the P-Tex Stick to where it's on fire like a candle, holding the stick at an angle so the material drips off the stick into the gouge. Fill the gouge completely until it's flush with base. Too much is better than not enough. Let the material cool and then, using a sharp razor blade, carefully cut any additional material that has filled the repair hole so the base is flush.